Mold Remediation & Removal in Orlando
Florida's heat and humidity make mold a year-round problem, and it can spread in as little as 48 hours. We find the moisture source, contain it, and remove mold completely.
Think you have a mold problem?
Get a free visual assessment and an answer in minutes, not days.
Fast Emergency Response
We respond quickly and work efficiently without cutting corners, delivering reliable results through professional restoration work.
Licensed & Insured
Our team is fully licensed and insured, with every job handled safely and to professional industry standards.
Quality Work You Can Rely On
We stand behind our work and hold every project to clear quality expectations from start to finish.
Locally Owned & Operated
We're rooted in the community and committed to honest work that builds trust, not quick fixes.
What actually causes damage in Orlando.
Orlando sits far enough inland that storm surge is not the threat, and that leads a lot of homeowners to assume hurricanes are somebody else’s problem. Hurricane Ian in 2022 proved otherwise: the freshwater flooding it left across Orange and Seminole counties, days after landfall on the other coast, was some of the worst on record.
Freshwater and stormwater flooding
Central Florida drains into lakes, retention ponds, and slow rivers. When a tropical system stalls, those systems back up for days after the rain stops, and water rises into houses that were dry through the storm itself.
Attic and AC condensate losses
A large share of Orlando homes run the air handler in the attic. A blocked condensate drain or a failed pan quietly soaks the ceiling below, and the first sign is usually a stain or a sagging patch of drywall rather than any noise. By then the insulation above it has been wet for weeks.
Roof and window failures from convective storms
Central Florida sees more thunderstorm days than almost anywhere in the country. Wind-driven rain, hail, and lightning damage lift shingles and open flashing, and the resulting leak shows up in an interior room far from the actual breach.
Get your free visual mold assessment
Tell us what you're seeing and a Swift advisor calls you back, usually within the hour. No obligation, and we bill your insurance directly.
(305) 733-4134
Recent Mold Restorations
Real jobs across Florida, from thermal moisture detection to full restoration.
Moisture Metering
Emergency Response Fleet
Thermal Moisture Detection
Commercial Ceiling Restoration
Flood Cut & Containment
Structural Drying
Post-Loss Restoration
Storm Damage Assessment
What mold does while you wait
Mold only needs moisture, a food source and time. In Florida humidity it has the first two already.
24 to 48 hrs
Spores germinate
On damp drywall, wood or carpet pad, dormant spores start growing before anything is visible.
3 to 12 days
Colonies establish
Growth becomes visible as spots or staining, and the musty odor most people notice first appears.
Weeks
It spreads out of sight
Colonies move through wall cavities, under flooring and into HVAC, raising indoor spore counts.
Months
Materials break down
Drywall, insulation and framing degrade, and a contained removal becomes a much larger tear-out.
Signs you have a mold problem
Mold hides. If any of these sound familiar, it's worth a free visual assessment before it spreads further.
Visible spots or discoloration
Black, green, or white patches on walls, ceilings, grout, or behind furniture. Even small spots signal a larger problem inside the surface.
A musty, earthy smell
A persistent damp odor that returns after cleaning almost always means hidden mold behind walls or under flooring.
Allergy or breathing symptoms
Coughing, congestion, or itchy eyes that ease when you leave the house point to airborne spores.
Recent leak, flood, or high humidity
After any water event, or in South Florida's year-round humidity, mold can start within 24–48 hours.
Spot mold? Do this, not that.
Do this right now
Keep everyone out
Keep people and pets out of the affected room until it is inspected.
Turn off your HVAC
Shut down A/C and heating so spores stop spreading through the vents.
Document the area
Photograph the growth and any damage for your insurance claim.
Call for a free visual assessment
Reach us 24/7 and we'll tell you exactly what you're dealing with.
Please don't
Don't scrub or bleach it
Scrubbing or bleaching releases spores into the air and only hides the surface while the source keeps growing.
Don't run fans toward it
Airflow across mold lifts spores and pushes them through the rest of the home and your air vents.
Don't disturb it
Moving or bagging moldy materials yourself disturbs the colony and can spread it into clean rooms.
Don't wait it out
Mold spreads fast in Florida humidity, so every day you wait means more damage and higher cost.
What we handle
From black mold behind drywall to recurring bathroom growth, we handle every kind of mold Florida throws at your property, and fix the moisture cause so it stays gone.
Black & toxic mold removal
We safely contain and remove hazardous growth, then verify the air is clean with post-remediation testing.
Hidden mold behind walls & in HVAC
Mold thrives where you can’t see it. We inspect wall cavities, subfloors, and duct systems that spread spores through the whole building.
Bathroom, kitchen & attic mold
The humid, poorly ventilated spots where Florida mold starts. We remove it and advise on ventilation to keep it gone.
Post-water-damage remediation
After any leak or flood, mold follows within 24–48 hours. We remediate and put preventive drying in place.
Moisture-source detection
The step most companies skip. We locate and correct the water problem so the mold doesn’t return.
Commercial & multi-unit remediation
For property managers and business owners, we contain and remediate with minimal disruption to tenants and operations.
Our mold remediation process
A structured, insurance-ready response. You make one call, we handle containment, removal, and verification.
One Call
A live dispatcher answers 24/7 and schedules your free visual assessment right away.
Inspect & Test
We locate the moisture source, map every affected area, and assess air quality.
Contain & Remove
Containment barriers and negative air keep spores from spreading while we remove mold at the source.
Inspect & Clearance
We inspect the remediation work and re-test air quality to confirm the space is clean and mold-free.
What Our Clients
Say About Us
Swift Restoration is trusted by thousands of homeowners and businesses across Florida.
"A pipe burst while we were on vacation and Swift had a crew at our door within the hour. They extracted the water, dried everything, and dealt with our insurance directly. We never lifted a finger."
Licensed techs who fix the cause, not just the spots.
Licensed Technicians
Trained in containment, safe removal, and post-remediation verification.
Air-Quality Tested
We don’t just remove mold. We verify the air is clean before we close out.
Safe for Your Family
Sealed containment protects the rest of your home while we work.
Mold coverage and your claim
When mold results from a covered water loss, remediation is often covered too. We document the source and the damage and bill your insurer or public adjuster directly, so there's no upfront cost on covered claims. If you choose not to file, or the claim is denied, you're responsible for payment.
(305) 733-4134Mold remediation across Orlando
Central Florida work is routed through the I-4 and Turnpike corridor, covering Orange, Seminole, and Osceola counties.
Orange County, Central Florida
Zip codes 32801 · 32803 · 32804 · 32806 · 32819 · 32827 · 32789 and surrounding
Other metros we serve
Mold questions,
answered
Everything worth knowing before you call, from how fast mold spreads to what insurance covers.
Mold can begin growing within 24–48 hours of moisture exposure, and faster in Florida's humidity. Fast action limits both the damage and the health risk.
Any mold can affect indoor air quality and trigger respiratory and allergy symptoms. We contain and remove it safely, then verify the air is clean.
Surface bleaching hides mold without killing the source inside walls or under floors. It returns unless the moisture problem is fixed, which is what remediation does.
Yes. Every remediation starts by locating and correcting the moisture source, otherwise the mold comes back.
When mold results from a covered water loss, remediation is often covered too. We document the source and the damage and coordinate directly with your insurer.